Important:
US Bound shipments are only available via postal services.
Donald Trump is yet again harming the US economy. US Shipments are currently suspended until this can be assessed.
"A proclamation signed October 23, 2026 modifies Proclamation 11048, as amended, changing which Canadian-origin products are subject to the 50% Section 338 tariff. The changes apply to goods entered for consumption, or withdrawn from warehouse for consumption, on or after 12:01 a.m. ET on October 30, 2026. The entry date decides which rules apply."

GRGDO1 Humidity and Temperature Add-Ons

(1 customer review)

Price range: $4.00 through $5.00

GRGDO1 Humidity and Temperature addon options. You can chose a Single Wire DHT22 or the AHT20 I2C.

SKU: GRGDO1-DHT22 Category: Tag:

Description

These Humidity and Temperature units come with a female header as a GRGDOx addon option. Simply plug it into the GRGDOx programing header and add some YAML to your GRGDOx ESPHome configuration.

There are two options available, the DHT22 is a single wire type and will run in AUX1 or AUX2 with any GRGDOx. The AHT20 is an I2C based device with can only run on AUX1 on a v1 or v2 GRGDOx.

AHT20 provide higher accuracy without any YAML calibration, the DHT22 may require some calibration.

The latest GRGDOv3 can support it in either port.

Note: The VL53L1X ToF , AHT20 and HC-04 Ultrasound sensors require AUX1,  to run both a Temperature  and a distance  sensor feature use the DHT22 single wire device which can run in AUX2 at the same time.

Important: Homekit Firmware only supports a DHT22.

For configuration details look for the commented YAML entries in the setup guide: GDO Setup Guide

Additional information

Weight 0.006 kg
Dimensions 4 × 3 × 2 cm
Type

DHT22 Single Wire, AHT20 I2C

1 review for GRGDO1 Humidity and Temperature Add-Ons

  1. mastermind278 (verified owner) –

    Love this sensor!! I wanted to add a little something extra to my GDO and purchased this to be able to get temperature and humidity in the garage. This plugged easily into the GDO and I was able to easily get the sensor data right into Home Assistant.

Only logged in customers who have purchased this product may leave a review.