Gelidus Research 3 Phase Power Meter Riser Board

Description

The Gelidus Research 3 Phase Power Meter Riser Board expands the GRPM2 3 Phase Expandable Power Meter.

This 3 Phase Power Meter Riser provisions:

• Reliable non-intrusively connected energy monitoring hardware!
  • Adds 3 ATM90E32 input channels.
  • Flexible Voltage Reference input routing.
  • Cost effective main board expansion.

Software Elements:

The Gelidus Research Expandable 3 Phase Power Meter board is designed to run on ESPHome frameworks. ESPHome integration with Home Assistant (HA) is ideal for providing a rich user interface. Adding the PM2 to ESPHome and HA is easy using the preinstalled PM2 captive portal or directly with the USB-C programming port. Once connected to your WIFI network you can interface to HA using one of the provided install guides. ESPHome network connectivity is via Thread or the standard WiFi 6 mode.

Coming Soon (PM2 Install Guide: https://www.gelidus.ca/pm2-setup-guide)

Example YAML: pm2v1

Additional Info: https://esphome.io/components/sensor/atm90e32

Features:

• IC: MicroChip ATM90E32
• Real Time Data Sampling
  • 3 current channels – 20-200A per channel with the various CT’s we offer.
  • Each Phase Voltage Reference can be selected from the 3 phases.
  • Measurement Error: 0.5 to 1% based on the chosen CT type.
  • Dynamic Range up to 6000:1 based on the chosen CT type.
  • Gain Selection: Up to 4x
  • Voltage Reference Drift Typical (ppm/°C): 6
  • ADC Resolution (bits): 16
• Data Outputs
  • Voltage
  • Current
  • Frequency
  • IC Temperature
  • Active Power
  • Reactive Power
  • Apparent Power
  • Power Factor
  • Phase Angle
  • Harmonic Power
  • Peek Current

3D printable STL plastics files are available here:

Enclosures: Base Board, Snap Locking One Layer Riser,  Snap Locking One Layer Cap, Snap Locking Two Layer Cap, Snap Locking Cap