Important:
US Bound shipments are only available via postal services.
Note: We are suspending all US shipments on Oct 15th.
The next round of CBP tariff changes and processing paper work requirements are not reasonable for low value products. They are coming into force on Oct 22nd.
We do not depend on US sales and the additional costs of providing extensive CBP paper work for every product is more than we are willing to accept at the moment.

Gelidus Research PM1v2 Expandable 2 or 3 Phase Power Meter

$53.00

The PM2 delivers ESPHome/Home Assistant Split Single Phase or 3 Phase power monitoring.

  • PM2 Hardware Features
    • Fused Switched On/Off selectable 120/240V AC supply input
    • AC Mains isolation supply and voltage sense transformer on main board
    • Optional Individual Phase Channel Voltage References (120/240 to 6V AC optional reference transformer(s) required)
    • 3 Phase expandable riser channel cards with fully routable AC voltage reference inputs to CT line matching.
    • Integrated ESP32-C6 module supports Thread and WiFi on ESPHome.
    • USB flashing connector
    • CT Phono inputs and CT screw terms on main board (Expansion risers are CT phono only)

9 in stock (can be backordered)

SKU: PM2-BB-1 Categories: ,

Description

The Gelidus Research Expandable 2 or 3 Phase Power Meter monitors energy usage of your AC mains panel and optional circuits in real time.

This 3 Phase Power Meter provisions:

  • Energy usage data collection with ESPHome and Home Assistant
    • View the energy usage of your entire home.
    • Monitor costs of your electric appliances.
    • Review and graph historical energy data.
    • Monitor your Day, Hour, Week, Month, Year total Kilowatts (KWH)
    • Deep insight with Active, Apparent, Harmonic Power, Phase Angle, Peek Current and Power Factor data.
    • Optional Voltage Reference Transformers (VRT) and 3 channel expansion modules.
  • Reliable non-intrusively connected energy monitoring hardware!
    • Cost effective, very accurate and pre-calibrated.
    • Powerful 160Mhz ESP32-C6 wireless module coupled with an ATM90E32.
    • Antenna included for exceptional WiFi/Thread range.
    • IEEE 802.15.4 Thread, Matter, Zigbee and Wifi 6 capable hardware.
    • Works with ESPHome Wifi, BLE or Thread components.
    • Powered  via an AC mains isolation transformer.
    • Metering is connected via non-intrusive current transformer phase line clamps.
    • Completely isolated mains power supply and mains monitoring circuit connections

Software Elements:

The Gelidus Research Expandable  2 or 3 Phase Power Meter board is designed to run on ESPHome frameworks. ESPHome integration with Home Assistant (HA) is ideal for providing a rich user interface. Adding the PM2 to ESPHome and HA is easy using the preinstalled PM2 captive portal or directly with the USB-C programming port. Once connected to your WIFI network you can interface to HA using one of the provided install guides. ESPHome network connectivity is via Thread or the standard WiFi 6 mode.

PM2 Install Guide: https://www.gelidus.ca/pm2-setup-guide

Example YAML: pm2v1

Additional Info: https://esphome.io/components/sensor/atm90e32

Compare the PM1v2 with other mainstream products  https://www.gelidus.ca/home-energy-monitor-comparisons/

Features:

  • IC: MicroChip ATM90E32
  • Real Time Data Sampling
    • Up to 18 current channels – 20-200A per channel with the various CT’s we offer.
    • Expandable from 3 to 18 channels using 3 channel stackable risers.
    • 1 voltage reference integrated with the internal AC isolation transformer.
    • 2 additional reference voltage inputs are configurable for high accuracy installs.
    • Measurement Error: 0.5 to 1% based on the chosen CT type.
    • Dynamic Range up to 6000:1 based on the chosen CT type.
    • Gain Selection: Up to 4x
    • Voltage Reference Drift Typical (ppm/°C): 6
    • ADC Resolution (bits): 16
  • Data Outputs
    • Voltage
    • Current
    • Frequency
    • IC Temperature
    • Active Power
    • Reactive Power
    • Apparent Power
    • Power Factor
    • Phase Angle
    • Harmonic Power
    • Peek Current

3D printable STL plastics files are available here:

Enclosures: PM2.v1.4.cap PM2.v1.4.one.layer PM2.v1.4.one.layer.cap PM2.v1.4.bot PM2.v1.4.two.layer.cap PM2.v1.4.so.cap

An instruction guide is currently in development. In the meanwhile you can find supporting YAML here.  https://github.com/GelidusResearch/grpm2

Hardware Reference Manual: Hardware-Reference-Manual.pdf

Additional information

Weight 0.3 kg
Dimensions 10 × 6 × 5 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…